? semiconductor components industries, llc, 2006 august, 2006 ? rev. 4 1 publication order number: sa5.0ca/d sa5.0ca series 500 watt peak power minimosorb ? zener transient voltage suppressors bidirectional* the sa5.0ca series is designed to protect voltage sensitive components from high voltage, high ? energy transients. they have excellent clamping capability, high surge capability, low zener impedance and fast response time. the sa5.0ca series is supplied in on semiconductor?s exclusive, cost-effective, highly reliable surmetic axial leaded package and is ideally-suited for use in communication systems, numerical controls, process controls, medical equipment, business machines, power supplies and many other industrial/consumer applications. specification features: ? working peak reverse voltage range ? 5.0 to 170 v ? peak power ? 500 watts @ 1 ms ? esd rating of class 3 (>16 kv) per human body model ? maximum clamp voltage @ peak pulse current ? low leakage < 1 a above 8.5 v ? ul 497b for isolated loop circuit protection ? maximum temperature coefficient specified ? response time is typically < 1 ns mechanical characteristics: case: void-free, transfer-molded, thermosetting plastic finish: all external surfaces are corrosion resistant and leads are readily solderable maximum lead temperature for soldering purposes: 230 c, 1/16 from the case for 10 seconds polarity: cathode band does not imply polarity mounting position: any maximum ratings rating symbol value unit peak power dissipation (note 1) @ t l 25 c p pk 500 watts steady state power dissipation @ t l 75 c, lead length = 3/8 derated above t l = 75 c p d 3.0 30 watts mw/ c thermal resistance, junction ? to ? lead r jl 33.3 c/w operating and storage temperature range t j , t stg ? 55 to +175 c 1. nonrepetitive current pulse per figure 3 and derated above t a = 25 c per figure 2. *please see sa5.0a to sa170a for unidirectional devices. device package shipping ordering information axial lead case 59 plastic saxxxca axial lead 1000 units/box saxxxcarl* axial lead 5000/tape & reel l = assembly location saxxxca = on device code yy = year ww = work week l sa xxxca yyww devices listed in bold, italic are on semiconductor preferred devices. preferred devices are recommended choices for future use and best overall value. http://onsemi.com *sa6.5ca, sa48ca, sa64ca, and sa78ca not available in 5000/tape & reel
sa5.0ca series http://onsemi.com 2 electrical characteristics (t a = 25 c unless otherwise noted) symbol parameter i pp maximum reverse peak pulse current v c clamping voltage @ i pp v rwm working peak reverse voltage i r maximum reverse leakage current @ v rwm v br breakdown voltage @ i t i t test current v br maximum temperature variation of v br bi ? directional tvs i pp i pp v i i r i t i t i r v rwm v c v br v rwm v c v br
sa5.0ca series http://onsemi.com 3 electrical characteristics (t a = 25 c unless otherwise noted.) device device marking v rwm (note 2) i r @ v rwm breakdown voltage v c @ i pp (note 4) v br v br (note 3) (volts) @ i t v c i pp (volts) ( a) min nom max (ma) (volts) (a) (mv/ c) sa5.0ca sa5.0ca 5 600 6.4 6.7 7 10 9.2 54.3 5 sa6.0ca sa6.0ca 6 600 6.67 7.02 7.37 10 10.3 48.5 5 sa6.5ca* sa6.5ca* 6.5 400 7.22 7.60 7.98 10 11.2 44.7 5 sa7.0ca sa7.0ca 7 150 7.78 8.19 8.6 10 12 41.7 6 sa7.5ca sa7.5ca 7.5 50 8.33 8.77 9.21 1 12.9 38.8 7 sa8.0ca sa8.0ca 8 25 8.89 9.36 9.83 1 13.6 36.7 7 sa8.5ca sa8.5ca 8.5 5 9.44 9.92 10.4 1 14.4 34.7 8 sa9.0ca sa9.0ca 9 1 10 10.55 11.1 1 15.4 32.5 9 sa10ca sa10ca 10 1 11.1 11.7 12.3 1 17 29.4 10 sa11ca sa11ca 11 1 12.2 12.85 13.5 1 18.2 27.4 11 sa12ca sa12ca 12 1 13.3 14 14.7 1 19.9 25.1 12 sa13ca sa13ca 13 1 14.4 15.15 15.9 1 21.5 23.2 13 sa14ca sa14ca 14 1 15.6 16.4 17.2 1 23.2 21.5 14 sa15ca sa15ca 15 1 16.7 17.6 18.5 1 24.4 20.6 16 sa16ca sa16ca 16 1 17.8 18.75 19.7 1 26 19.2 17 sa17ca sa17ca 17 1 18.9 19.9 20.9 1 27.6 18.1 19 sa18ca sa18ca 18 1 20 21.05 22.1 1 29.2 17.2 20 sa20ca sa20ca 20 1 22.2 23.35 24.5 1 32.4 15.4 23 sa22ca sa22ca 22 1 24.4 25.65 26.9 1 35.5 14.1 25 SA24CA SA24CA 24 1 26.7 28.1 29.5 1 38.9 12.8 28 sa26ca sa26ca 26 1 28.9 30.4 31.9 1 42.1 11.9 30 sa28ca sa28ca 28 1 31.1 32.75 34.4 1 454 11 31 sa30ca sa30ca 30 1 33.3 35.05 36.8 1 48.4 10.3 36 sa33ca sa33ca 33 1 36.7 38.65 40.6 1 53.3 9.4 39 sa36ca sa36ca 36 1 40 42.1 44.2 1 58.1 8.6 41 sa40ca sa40ca 40 1 44.4 46.55 49.1 1 64.5 7.8 46 sa43ca sa43ca 43 1 47.8 50.3 52.8 1 69.4 7.2 50 sa45ca sa45ca 45 1 50 52.65 55.3 1 72.7 6.9 52 sa48ca* sa48ca* 48 1 53.3 56.1 58.9 1 77.4 6.5 56 sa51ca sa51ca 51 1 56.7 59.7 62.7 1 82.4 6.1 61 sa58ca sa58ca 58 1 64.4 67.8 71.2 1 93.6 5.3 70 sa60ca sa60ca 60 1 66.7 70.2 73.7 1 96.8 5.2 71 sa64ca* sa64ca* 64 1 71.1 74.85 78.6 1 103 4.9 76 sa70ca sa70ca 70 1 77.8 81.9 86 1 113 4.4 85 sa78ca* sa78ca* 78 1 86.7 91.25 95.8 1 126 4.0 95 sa85ca sa85ca 85 1 94.4 99.2 104 1 137 3.6 103 sa90ca sa90ca 90 1 100 105.5 111 1 146 3.4 110 sa100ca sa100ca 100 1 111 117 123 1 162 3.1 123 sa110ca sa110ca 110 1 122 128.5 135 1 177 2.8 133 sa120ca sa120ca 120 1 133 140 147 1 193 2.5 146 sa130ca sa130ca 130 1 144 151.5 159 1 209 2.4 158 sa150ca sa150ca 150 1 167 176 185 1 243 2.1 184 notes: 2. minimosorb transient suppressors are normally selected according to the maximum working peak reverse voltage (v rwm ), which should be equal to or greater than the dc or continuous peak operating voltage level. 3. v br measured at pulse test current i t at an ambient temperature of 25 c. 4. surge current waveform per figure 3 and derate per figures 1 and 2. *not available in the 5,000/tape & reel.
sa5.0ca series http://onsemi.com 4 100 10 1 0.1 0.1 ms 1 ms 10 ms 100 ms 1ms 10ms p p , peak power (kw) t p , pulse width figure 1. pulse rating curve nonrepetitive pulse waveform shown in figure 3 100 80 60 40 20 0 0 25 50 75 100 125 150 175 200 peak pulse derating in % of peak power or current @ t a = 25 c t a , ambient temperature ( c) figure 2. pulse derating curve 100 50 0 01 234 t, time (ms) value (%) pulse width (t p ) is defined as that point where the peak current decays to 50% of i pp . peak value ? i pp half value ? i pp 2 figure 3. pulse waveform 5 4 3 2 1 0 0 25 50 75 100 125 150 175 200 p d , steady state power dissipation (watts) t l , lead temperature ( c) 3/8 3/8 figure 4. steady state power derating t r 10 s t p k ul recognition* the entire series including the bidirectional ca suffix has underwriters laboratory recognition for the classification of protectors (qvgv2) under the ul standard for safety 497b and file #e 116110. many competitors only have one or two devices recognized or have recognition in a non-protective category. some competitors have no recognition at all. with the ul497b recognition, our parts successfully passed several tests including strike voltage breakdown test, endurance conditioning, t emperature test, dielectric voltage-withstand test, discharge test and several more. whereas, some competitors have only passed a flammability test for the package material, we have been recognized for much more to be included in their protector category. *applies to sa5.0a, ca ? sa170a, ca.
sa5.0ca series http://onsemi.com 5 outline dimensions 500 watt peak power minimosorb ? transient voltage suppressors ? axial leaded mini mosorb case 59 ? 09 issue s k a d k b dim min max min max millimeters inches a 5.80 7.60 0.228 0.299 b 2.60 3.60 0.102 0.142 d 0.71 0.86 0.028 0.034 k 25.44 ??? 1.000 ??? notes: 1. dimensioning and tolerancing per ansi y14.5m, 1982. 2. controlling dimension: inch. 3. 59?04 obsolete, new standard 59?09. 4. 59?03 obsolete, new standard 59?10. 5. all rules and notes associated with jedec do?41 outline shall apply. 6. polarity denoted by cathode band. 7. lead diameter not controlled within f dimension. on semiconductor and are registered trademarks of semiconductor components industries, llc (scillc). scillc reserves the right to mak e changes without further notice to any products herein. scillc makes no warranty, representation or guarantee regarding the suitability of its products for an y particular purpose, nor does scillc assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including wi thout limitation special, consequential or incidental damages. ?typical? parameters which may be provided in scillc data sheets and/or specifications can and do vary in different application s and actual performance may vary over time. all operating parameters, including ?typicals? must be validated for each customer application by customer?s technical experts. scillc does not convey any license under its patent rights nor the rights of others. scillc products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the scillc product could create a sit uation where personal injury or death may occur. should buyer purchase or use scillc products for any such unintended or unauthorized application, buyer shall indemnify and hold scillc and its of ficers, employees, subsidiaries, af filiates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that scillc was negligent regarding the design or manufacture of the part. scillc is an equal opportunity/affirmative action employer. this literature is subject to all applicable copyright laws and is not for resale in any manner. publication ordering information n. american technical support : 800 ? 282 ? 9855 toll free usa/canada europe, middle east and africa technical support: phone: 421 33 790 2910 japan customer focus center phone: 81 ? 3 ? 5773 ? 3850 sa5.0ca/d literature fulfillment : literature distribution center for on semiconductor p.o. box 5163, denver, colorado 80217 usa phone : 303 ? 675 ? 2175 or 800 ? 344 ? 3860 toll free usa/canada fax : 303 ? 675 ? 2176 or 800 ? 344 ? 3867 toll free usa/canada email : orderlit@onsemi.com on semiconductor website : www.onsemi.com order literature : http://www.onsemi.com/orderlit for additional information, please contact your local sales representative minimosorb and surmetic are trademarks of semiconductor components industries, llc.
|
